12/12/16 47
POCLAIN HYDRAULICS Hydraulic components - Flow control valves
Flow control valves pressure compensated Throttle with Check valvesFlow dividers
THROTTLE WITH CHECK VALVE VP-NDV (NG 6, 10)
• NG 6, 10
• Up to 350 bar [5 076 PSI]
• Up to 100 L/min [26.4 GPM]
• Connecting dimensions to ISO 4401.
• For flow control in both service lines.
• For throttling in supply - and return lines.
• For vertical stacking - sandwich plate design.
• Height and width of the valves to ISO 7790 norms.
VP-NDV-10-.., VP-NDV-6-..
Operation Hydraulic symbol
Throttle with check valves type VP-NDV are used for throttling the pilot and main flow of
the hydraulic fluid in the line A and B.
These valves consist of two throttling spools with setting
screws and two check valves
which are built in a housing.
In direction V to P (see the hydr
aulic symbol) flows the hydraulic fluid with low pressure
loss through the check valve.
In direction P to V is the hydraulic fluid flow thr
ottled depending on adjustment of the
throttling spool.
Mounting example
Features
Size 6 10
Flow rate L/min [GPM] 60 [15
.8] 100 [26.4]
Operating pressure bar [P
SI] 350 [5 076]
Cracking pressure bar [P
SI]
0,4 [5
.8]
Oil temperature range °C [°
F] -20 to +70 [-4 to +158]
Viscosity range mm
2
/s [SUS] 15 to 380 [69.5 to 1760]
Filtration NAS 1638 8
Mass kg [lb] 1,45 [3.20] 3,3 [7.28]
THROTTLE WITH CHECK VALVES